|
$1799.95 SPECIAL ORDER! |
QSY120 | CALL TO ORDER! |
| FEATURES: |
|
The 120" Somenized tm Yak 54 known as one of the best ever designs in ARF version. We are offering two color schemes. Brio scheme and Leseberg scheme.
- Super light, rigid structure with foam free technology - Two piece cowl - Plug & Run tuned pipe/canister mounts - Carbon Fiber wing/stab tubes and tailwheel assembly - Composite landing gear - Titanium axles and pushrods - CNC G10 phenolic control horns - Ball links and pull-pull rudder system - Removable clear Side Force Generators - Genuine Somenized™ design for unbelievable performance Included Hardware: -Carbon Fiber wing/stab tubes and tailwheel assembly -Composite landing gear -Titanium axles and pushrods -CNC G10 phenolic control horns -Ball links and pull-pull rudder system -Removable clear Side Force Generators |
| SPECS | Yak 54 102'' |
| Size | 38% |
| Wingspan | 120'' |
| Wing Area | 2800 sq in |
| Weight | 40-42 lbs |
| Engine | 150cc -200cc |
| FULL SCALE INFORMATION: | ||||||||||||||||||||||
|
WARNING - Gasoline and Turbine powered aircraft are not manufactured to withstand unlimited G's. Any aircraft can fail, be it a wing folding up or a fuselage breaking in half under too high of a load. Just as any full size aircraft, model aircraft have a maximum G rating. Because you are not in the plane flying it and experiencing the G's and reading the G-meter, it is more difficult to judge the G's on the aircraft, and it is very easy to exceed the limits of the aircraft. Understand that if you perform a snap roll, parachute, wall, blender, knife edge loop, or pull hard on the elevator at almost any speed, you can be putting in excess of 15 G's, even in excess of 30 G's, and most aircraft can only designed to take 10-12 G's. If you perform any violent maneuver, you can break your plane. When I perform hard maneuvers, especially for the first time on an airframe, I am prepared for a failure and am prepared for it as best I can be. This mainly includes performing the maneuver far enough away from spectators that in event of a failure that I am not endangering others. In addition, be prepared for the manufacturer to not pay for a new airframe which is broken during flight. It is common practice for any manufacturer to not replace an airframe which breaks in the air or upon landing. I have only seen manufacturers replace airframes when they have received many of the same failures and the manufacturer determines that there was a design or manufacturing error. If you break an airframe, and you are the only one to do so, then it is probably not the fault of the manufacturer. Please fly safely, and avoid full throttle operation other than at low airspeeds.










































|
|
|
|
| Check.