 P160SX |
|
|---|---|
 |
Call to Order!
Coming Soon! $TBA
Part#JCATP160SX |
Specs
| Thrust: | 34 lbs @ 123,000 RPM |
|
| Weight: | 3.1 LB |
|
| Diameter: | 4.4 inches |
|
| RPM Range: | 32,000 - 123,000 RPM | |
| Exhaust gas temp.: | 650°C-770°C |
|
| Fuel consumption: | 16 oz per/min at full power |
|
| Fuel: | Jet A1, 1-K kerosene |
|
| Lubrication: | approximately 5% synthetic turbine oil in the fuel |
|
| Maintenance interval: | 25 hours |
P160SX Thrust Chart
| RPM | Thrust |
| 32,000 | 1.0 |
| 100,000 | 19.0 |
| 105,000 | 22.0 |
| 115,000 | 28.5 |
| 120,000 | 31.8 |
| 123,000 | 34.0 |
The values are approximate and can vary slightly from engine to engine.
Values at Standard Temperature and Pressure.
Features
The P160SX comes with an internal kero start. It is delivered with 36 lbs of thrust but can be user set up to 38 lbs.
The P160SX comes with an internal kero start. It is delivered with 36 lbs of thrust but can be user set up to 38 lbs.
JetCat P160SX turbine complete with starter includes:
- Internal Kero Start
- 6 lbs more thrust than the P120
- Jet-tronic ECU (fuel control electronics)
- GSU (Display and Programmer)
- LED I/O board
- Miniature fuel pump
- Electronic starting gas valve
- Electronic Fuel valve
- Fuel tubing, tubing connector set, filters, and cable set
- 6 cell, 1250mA battery pack
- Starting gas tank
- Turbine mounting clamp, RamTec compatible
- Detailed instruction manual
| 
| 
| 
| 