 TITAN-SE |
|
|---|---|
 |
Call to Order!
IN STOCK $3,795.00
Part#JCATTITAN-SE |
Specs
| Thrust: | 34 lbs @ 123,000 RPM |
|
| Weight: | 3.1 LB |
|
| Diameter: | 4.4 inches |
|
| RPM Range: | 32,000 - 123,000 RPM | |
| Exhaust gas temp.: | 650°C-770°C |
|
| Fuel consumption: | 16 oz per/min at full power |
|
| Fuel: | Jet A1, 1-K kerosene |
|
| Lubrication: | approximately 5% synthetic turbine oil in the fuel |
|
| Maintenance interval: | 25 hours |
TITAN-SE Thrust Chart
| RPM | Thrust |
| 32,000 | 1.0 |
| 100,000 | 19.0 |
| 105,000 | 22.0 |
| 115,000 | 28.5 |
| 120,000 | 31.8 |
| 123,000 | 34.0 |
The values are approximate and can vary slightly from engine to engine.
Values at Standard Temperature and Pressure.
Features
JetCat TITAN-SE turbine complete with starter includes:
- 6 lbs more thrust than the P120
- Jet-tronic ECU (fuel control electronics)
- GSU (Display and Programmer)
- LED I/O board
- Miniature fuel pump
- Electronic starting gas valve
- Electronic Fuel valve
- Fuel tubing, tubing connector set, filters, and cable set
- 6 cell, 1250mA battery pack
- Starting gas tank
- Turbine mounting clamp, RamTec compatible
- Detailed instruction manual
| 
| 
| 
| 