MPI TITANIUM AXLES - PAIR

For up to 55 lb planes

2" length 3/16" diameter axles

The hole in the landing gear must be 5/16".

Made by  MPI

1/2 the weight of steel axles.

"E" clips are included and are available below if you want some spares (you will want some spares in case one flys off when you remove it). These clips keep the tires in place. Or, use the Dubro wheelcollars (not included) offered below.

MPI E Clips

For use with the MPI Titanium Axles. 5 E-clips per pack. These rings bow to provide spring like retention so you can take up any end play and tighten up any loose assemblies. Like all E-style rings, they fit directly into the shaft groove from the side of the shaft. Made of C1060-C1090 spring steel with a black phosphate finish.

MPI STEEL AXLES - PAIR

For up to 55 lb planes.

 2" length 3/16" diameter axles.

The hole in the landing gear must be 5/16".

 Made by MPI.

Wheelcollars are required.

They offer similar performance to the DuBro axles at a slightly lower price.

DUBRO STEEL AXLES - PAIR

For up to 55 lb planes.

 2" length 3/16" diameter axles.

The hole in the landing gear must be 5/16".

 Made by DuBro

Wheelcollars are required.