Fromeco 3-5 output "Ion Cube" Li Ion Charger

The best value in a multi-output Li-Ion charger. Great for TBM or Fromeco Li Ion batteries.

- The basic model is available in 3 outputs and is easily upgradeable to 4 or 5 outputs and easily upgradeable to offer a "brain" for charging and informational options.

- The basic model is for charging three Li Ion battery packs which are 2-cell 7.4v, 3-cell 11.1v or 4-cell 7.4v (2s2p) or any combination thereof, at once.

- Includes 3 charge leads which go to the Li Ion batteries.

- Does not include a power source. A powerful 12V car battery or AC adapter is required. This device can put out 15 amps total into 5 batteries, so a source capable of 15 amps is required.

- Charges at 1.5 amps in the basic configuration. This is 4 times faster than the Duralite 4 output charger. If you purchase a "brain" separately, you can vary the charge rate from .1 amps to 2.9 amps. The 2.9 amp setting can be used which is 7 times faster than the Duralite 4 output charger which is set at 0.4 amps.

- All channels automatically detect whether the pack to be charged is 2-cell or 3-cell. Just plug  in the battery and the charging starts correctly. The blue light will blink 2 times for a 2-cell battery or 3 times for a 3-cell battery.

- Once the pack(s) are being charged, the blue light will remain lit. Once the pack(s) are fully charged, the blue light turns itself off.- Higher quality components than Duralite with much more consistent cutoff voltage

- Does NOT come with wires to connect to 12v power source. You will need some banana plugs to plug into the Ion Cube and alligator clips to connect to a 12v car battery. TBM offers the adapter below.

- If you want an AC adapter, the best value is a Pyramid PS 14 which is available at: http://www.efunctional.com/efunctional/