TBM | Plane Accessories - Engines - Desert Aircraft

Site Map

OPEN 9am to 6pm ET Mon-Fri

·Tips and Tricks

·How To Be An Awesome Pilot

·Why Lighter Planes Fly Better

·Radio Setup

·Engine Data

·DESERT AIRCRAFT Engines

·R & D Projects

·Videos

·Dent & Scratch

·TBM Decals

Home > Plane Accessories > Engines > Desert Aircraft > Accessories

Need a drill jig? **Click HERE!**

On This Page:
DA Spark Plugs DA-Fuel Filler DA-Ignition Adapter DA-Couplers DA-Smoke Fitting DA-Stand Offs

DA Spark Plugs:

NGK CM-6 plug

This spark plug is used in all DA engines.

IN STOCK
$13.99

Part#NGKplug

TBM TIP You should keep spare plugs with you at all times. During the break-in period when you are using petroleum based oils at 32:1 and running rich, this is a deadly combination for spark plugs fouling. Keep a set handy, and avoid running too rich.

DA Fuel Filler:

DA Fuel Filler

Can be used with gas or smoke.

Comes with six red anodized 4-40 screws.
Made for 1/8" fuel tubing.
Weighs 1/2 oz.

If you own a DA engine - you gotta have this!

IN STOCK $22

Part#DAfiller

TBM TIP Though it looks great, it can be hard to remove the plug from the base without a prying tool. No backplate is provided for the red anodized screws.

DA Ignition Adapter:

DA Ignition Adapter

(25mm ID for DA-100) 1-Teflon Coupler and 2-Clamps. You will need two of these for a twin cylinder engine.

IN STOCK $6.95

Part#TBMdaignadapter

DA Couplers:

DAMTC25

(25mm ID for DA-100) 1-Teflon Coupler and 2-Clamps. You will need two of these for a twin cylinder engine.

IN STOCK $9

Part#DAMTC25

DAMTC28

Weight: 5.3oz

(28mm ID for DA-150) 1-Teflon Coupler and 2-Clamps. You will need two of these for a twin cylinder engine.

IN STOCK $12

Part#DAMTC28

DA Smoke Fitting:

Dubro #241 Smoke Fitting

This is for putting smoke into headers or exhausts which aren't set up for smoke.

We offer the version which has 6-32 threads. Simply drill and tap and then screw in place. Works great!! You must use black high temperature tubing. If you use this in headers, the smoke will be better as the headers are hotter than in the canisters. If the headers have a flex section, those sections sometimes leak or break. If so, you will have a big mess if you run smoke, so tap the header after the flex section.

DA Stand Offs: