On This Page:


Canisters:

Canister Mufflers:

KS 86 canister muffler (non smoke fitting)

Inlet diameter: 25mm
Weight: 6.9 oz (no smoke)
Size: The can itself is 2.25"dia and 10" long. The inlet and exit tubes are 2" each for an overall length of 14".

 
Quantity:
 
IN STOCK $158

Part#DAKS86

KS 86S canister muffler with smoke

This is for 40-75cc single cylinder engines and for 80-120cc twin cylinder engines like the DA-50 and DA-100. Rear exhaust.
Canister only. Header is sold separately. These have no tuning and therefore have good transition from idle through mid range to high throttle. I prefer canisters over tuned pipes for throttle response, but the tuned pipes add HP, while the canisters do not.

The smoke system has a copper coil inside the canister to preheat the smoke oil to make better smoke. It's not just a pressure fitting.

Inlet diameter: 25mm
Weight: 7.3 oz with smoke
Size: The can itself is 2.25"dia and 10" long. The inlet and exit tubes are 2" each for an overall length of 14".

 
Quantity:
 
IN STOCK $178

Part# DAKS86S
Image Coming Soon...

KS95V Canister Muffler front Exhaust for DA 170

Info Coming Soon...

 
Quantity:
 
Backorder Now! $204

Part# DAks95v
Image Coming Soon...

KS95 Canister Muffler rear Exhaust for DA 170

Info Coming Soon...

 
Quantity:
 
Backorder Now! $204

Part# DAks95

TD75 from MTW (for Quique YAK)

This is for the QS 102" Yak because it is smaller in diameter than the TD75K. Only use it where space is a problem, use the TD75K otherwise since it is a little better.

This is for 40-75cc single cylinder engines and for 80-120cc twin cylinder engines like the DA-50 and DA-100
One canister only. Header is sold separately.

Total package of 2 headers, 2 canisters, 2 couplers and mount is about $400.

Inlet diameter: 25mm
Weight: 9.4 oz
Size: 13.5" front to back plus1" inlet, 2.125" diameter

 
Quantity:
 
Backorder Now! $162

Part#DATD75

TD75K from MTW

These are not for the QS 102" Yak because the "K" version is larger in diameter than the TD75. Use the "K" version unless space is a problem because it is a little better.

This is for 40-75cc single cylinder engines and for 80-120cc twin cylinder engines like the DA-50 and DA-100
Canister only. Header is sold separately.

Total package of 2 headers, 2 canisters, 2 couplers and mount is about $400.

Inlet diameter: 25mm
Weight: 9.4 oz
Size: 10" front to back plus 1" inlet, 2.5" diameter

 
Quantity:
 
IN STOCK $162

Part#DATD75K

TD110K from MTW

This is for the DA-85 DA-150. Canister only, no header or coupler.

Total package of 2 headers, 2 canisters, 2 couplers and mount is about $450.

Inlet diameter: 28mm
Weight: 11.2 oz
Size: 12" front to back plus 1" inlet, 3" diameter

 
Quantity:
 
IN STOCK $188

Part#DATD110K


Canister Mounts:


CM55S, CM70S & CM80S

Canister Mount 55mm Single. (for MTW TD75)


3 1/8" Wide, 3 1/8" High. Weight: 1 oz.

Quantity:
 


Backorder Now! $8

Part#DAcm55s

Canister Mount 70mm Single. (for MTW TD75K and JMB80)

4 5/8" Wide, 4 3/4" High. Weight: 1 oz.

Quantity:
 


Backorder Now! $10

Part#DAcm70s

Canister Mount 80mm Single. for MTW 110K)


5 1/8" Wide, 5 1/4" High. Weight: 1 oz.

Quantity:
 


IN STOCK $11

Part#DAcm80s


CM55D, CM70D & CM80D
The 55mm, 70mm, and 80mm are the diameters of the holes.

Canister Mount 55mm Double. (for MTW TD75)

6" Wide, 3 1/8" High. Weight: 1 oz.

Quantity:
 


IN STOCK $12

Part#DAcm55d

Canister Mount 70mm Double. (for MTW TD75K and JMB80)

7 3/4" Wide, 4" High. Weight: 1 oz.

Quantity:
 


IN STOCK $14

Part#DAcm70d

Canister Mount 80mm Double. (for MTW TD110K)

TBD" Wide, TBD" High. Weight: 1 oz

Quantity:
 


IN STOCK $16

Part#DAcm80d