The 2-blade Mejzlik props are very similar in performance to the PT Models propellers. The difference is that the Mejzlik props are heavier and stronger. They are more resistant to breaking in a nose over. The 3-blade Mejzlik props are much quieter than 2-blade props though they are quite heavy. They are produced from CF so they are very stiff. While two-blade props are very efficient, three-blade props aren't as efficient. A three blade prop always seems to be in the way when you're transporting  or working on your plane. The three-blade props are worse for pull and for downline braking, the only good thing about them is that they are quiet.  Use a smaller prop for freestyle (faster spool-up) and a larger prop for sequence flying (smoother acceleration). Mejzlik are made in the Czec Republic and are hard to come by, so they are not always in stock. If you want performance, use a 2-blade.

Custom drilling of your propeller is now available for an additional $7.00. After you choose the propeller you need, please add your custom drilling here. This may take an extra day or two depending on our workload. Please note that we cannot drill a CF spinner and propeller separately and have them match up! They must both be in our possession at the same time to align them properly.

We are committed to fast service, but Custom Cut or Drilled Props and Spinners may take UP TO 1 WEEK to have completed.  Please take that into consideration when ordering.

All props have a 10mm center hole

We are committed to fast service, and we usually ship the next day, but Custom Cut or Drilled Props and Spinners may take UP TO 1 WEEK to have completed depending on our workload. Please take that into consideration when ordering your items.

ALSO! Please double or triple check your drill and cut order. Almost every day we are sure we are asked to do the wrong thing like to drill a 150cc size prop or spinner cone with a 50cc drill jig. Sometimes we don’t catch the mistake. Sometimes we do, but this causes a delay because we must ask you what you want, and this takes time.

DIA	Pitch	Engine	Weight	Order	Custom Drilling: Add $7
22"	8"	50cc	-	Quantity:   IN STOCK $51.55 Part#MEJ2208-2	Quantity:   Choose Engine: DA50 ZDZ80 DA100 DA150 Custom Drilling: Add $7
23"	8"	50cc	-	Quantity:     $62 Part#MEJ2308-2	Quantity:   Choose Engine: DA50 ZDZ80 DA100 DA150 Custom Drilling: Add $7
26"	10"	70cc-85cc	-	Quantity:   IN STOCK $73 Part#MEJ2610-2	Quantity:   Choose Engine: DA50 ZDZ80 DA100 DA150 Custom Drilling: Add $7
27"	10"	DA-100, 3W-100, BME-110	9.0 oz	Quantity:   IN STOCK $80 Part#MEJ2710-2	Quantity:   Choose Engine: DA50 ZDZ80 DA100 DA150 Custom Drilling: Add $7
28"	10"	DA-100, 3W-100, BME-110	9.2 oz	Quantity:     IN STOCK $85 Part#MEJ2810-2	Quantity:   Choose Engine: DA50 ZDZ80 DA100 DA150 Custom Drilling: Add $7
30"	12"	DA-100, 3W-100, BME-110	9.5 oz	Quantity:   IN STOCK $99 Part#MEJ3012-2	Quantity:   Choose Engine: DA50 ZDZ80 DA100 DA150 Custom Drilling: Add $7
32"	10"	DA-150, 3W-150, ZDZ-160	13.1 oz	Quantity:     IN STOCK $115 Part#MEJ3210-2	Quantity:   Choose Engine: DA50 ZDZ80 DA100 DA150 Custom Drilling: Add $7