PT Models CF props are here. After many years of use in Europe, we are now importing them into the US. We have tested them and they are better than Mejzlik props. They are lighter, less expensive, and spool up quicker with the same pull. We still carry some Mejzlik propellers for those who prefer them.
These are the best CF props the market today because they are light, inexpensive, quiet, and have excellent thrust. They are produced from CF so they are very stiff. They are lighter than Mejzlik CF props and are about the same weight as wooden props in most sizes. Use a smaller prop for freestyle (lighter props like PT or TBM preferred) and a larger prop for sequence flying. PT Models and Mejzlik are made in the Check Republic. Check out this thread on RC Universe to see what others are saying about PT Models CF props: RCU Thread
Custom drilling of your propeller is now available for an additional $7.00. After you choose the propeller you need, please add your custom drilling here. This may take an extra day or two depending on our workload. Please note that we cannot drill a CF spinner and propeller separately and have them match up! They must both be in our possession at the same time to align them properly.
We are committed to fast service, but Custom Cut or Drilled Props and Spinners may take UP TO 1 WEEK to have completed. Please take that into consideration when ordering.
| CHOOSE THIS | IT WORKS FOR THIS |
| DA-50 | DA-50 |
| ZDZ-80 | ZDZ-40, ZDZ-50, ZDZ-60, ZDZ-80, ZDZ-100 |
| DA-100 | DA-85, DA-100, 3W-28 to 3W-106 |
| DA-150 | ZDZ-160, DA-150, 3W-120 up to 3W-157 |
We are committed to fast service, and we usually ship the next day, but Custom Cut or Drilled Props and Spinners may take UP TO 1 WEEK to have completed depending on our workload. Please take that into consideration when ordering your items.
ALSO! Please double or triple check your drill and cut order. Almost every day we are sure we are asked to do the wrong thing like to drill a 150cc size prop or spinner cone with a 50cc drill jig. Sometimes we don’t catch the mistake. Sometimes we do, but this causes a delay because we must ask you what you want, and this takes time.
| DIA | Pitch | Engine | Weight | Order | Custom Drilling: Add $7 |
| 21" | 10" | 30-40 cc | 5 oz |
IN STOCK
$51.95
Part#PT2110 |
Custom Drilling: Add $7 |
| 22" | 8" | 50cc | 5 oz |
IN STOCK
$54.95
Part#PT2208 |
Custom Drilling: Add $7 |
| 22" | 10" | 50cc | 5 oz |
IN STOCK $54.95
Part#PT2210 |
Custom Drilling: Add $7 |
| 23" | 8" | 50cc | 5 oz |
IN STOCK
$56.95
Part#PT2308 |
Custom Drilling: Add $7 |
| 23" | 10" | 58cc | 5 oz |
IN STOCK
$56.95
Part#PT2310 |
Custom Drilling: Add $7 |
| 24" | 8" | 58-40cc | 6 oz |
IN STOCK $60.95
Part#PT2408 |
Custom Drilling: Add $7 |
| 24" | 10" | 60-70cc | 6 oz |
IN STOCK $60.95
Part#PT2410 |
Custom Drilling: Add $7 |
| 25" | 10" | 70cc-80cc | 7 oz |
Part#PT2510 |
Custom Drilling: Add $7 |
| 26" | 8" | 70-85 cc | 7 oz |
IN STOCK $69.95
Part#PT2608 |
Custom Drilling: Add $7 |
| 26" | 10" | 75-85cc | 7 oz |
IN STOCK
$69.95
Part#PT2610 |
Custom Drilling: Add $7 |
| 27" | 8" | 100cc | 8.1 oz |
 $74.95Part#PT2708 |
Custom Drilling: Add $7 |
| 27" | 10" | 100cc | 8.1 oz |
IN STOCK $74.95
Part#PT2710 | |