TBM PROPELLERS ARE THE LOWEST PRICED PROPS AVAILABLE!

TBM has it's own line of propellers. These are the best quality and lowest priced props available. Very similar to the Bolly, Xoar, Menz, Vess, etc. We tested most of the props available today, and most are very high in performance. The slightly different tips shapes and other modifications are really of very little benefit. The only propellers we tested which were significantly less in performance are Zinger and Zinger Pro propellers. Once you switch away from Zinger you will notice a significant increase in vertical performance. Zinger does make a huge variety of props, and we have tested the 20x16 and such for high speed because they are the only company making that size, and they do perform OK, and you have no other option at this time.

Compare prices - they are the best anywhere since we buy direct from the factory.
All testing is completed, we will stack this prop up against any prop!
100% guarantee! Use it for 30 days. If you don't like it - return it for a full refund!*

Custom drilling of your propeller is now available for an additional $7.00. After you choose the propeller you need, please add your custom drilling here. This may take an extra day or two depending on our workload. Please note that we cannot drill a CF spinner and propeller separately and have them match up! They must both be in our possession at the same time to align them properly.

We are committed to fast service, but Custom Cut or Drilled Props and Spinners may take UP TO 1 WEEK to have completed.  Please take that into consideration when ordering.

All props have a 10mm center hole

*Note: Full refund does not include shipping. Propeller can be drilled and mounted, but the propeller must be in perfect shape other than that. Guarantee expires 30 days after purchase.

We are committed to fast service, and we usually ship the next day, but Custom Cut or Drilled Props and Spinners may take UP TO 1 WEEK to have completed depending on our workload. Please take that into consideration when ordering your items.

ALSO! Please double or triple check your drill and cut order. Almost every day we are sure we are asked to do the wrong thing like to drill a 150cc size prop or spinner cone with a 50cc drill jig. Sometimes we don’t catch the mistake. Sometimes we do, but this causes a delay because we must ask you what you want, and this takes time.

DIA	Pitch	Engine	Weight	Order	Custom Drilling: Add $7
22"	10"	45-62cc DA-50 Zen G-62 ZDZ-50 3W-50	4.6oz WOW!	Quantity:   $25 Part#TBMpr2210B	Quantity:   Choose Engine: DA50 ZDZ80 DA100 DA150 Custom Drilling: Add $7